Dell PowerEdge VRTX - Manual (Page 592)

592 IGMP Snooping Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IGMP_Snooping.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
ip igmp snooping vlan querier address
Use the ip igmp snooping vlan querier address Global Configuration mode
command to define the source IP address that the IGMP snooping querier
uses. Use the no form of this command to return to default.
Syntax
ip igmp snooping vlan vlan-id querier address ip-address
no ip igmp snooping vlan vlan-id querier address
Parameters
• vlan-id —Specifies the VLAN.
• ip-address —Source IP address.
Default Configuration
If an IP address is configured for the VLAN, it is used as the source address of
the IGMP snooping querier. If there are multiple IP addresses, the minimum
IP address defined on the VLAN is used.
Command Mode
Global Configuration mode
User Guidelines
If an IP address is not configured by this command, and no IP address is
configured for the querier’s VLAN, the querier is disabled.
Example
console(config)# ip igmp snooping vlan 1 querier address
10.5.234.205
ip igmp snooping vlan querier election
Use the ip igmp snooping vlan querier election Global Configuration mode
command to enable IGMP Querier election mechanism of an IGMP