Dell PowerEdge VRTX - Manual (Page 581)

Voice VLAN Commands 581
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Voice_VLAN.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Syntax
show voice vlan [type oui [{ interface-id | detailed }] ]
Parameters
• type oui—Common and OUI-voice-VLAN specific parameters are
displayed.
• interface-id—Specifies an Ethernet port ID.
• detailed—Displays information for non-present ports in addition to
present ports.
Default Configuration
If the type parameter is omitted the current Voice VLAN type is used.
If the interface-id parameter is omitted then information about all present
interfaces is displayed. If detailed is used, non-present ports are also
displayed.
Command Mode
Privileged EXEC mode
User Guidelines
Using this command without parameters displays the current voice VLAN
type parameters and local and agreed voice VLAN settings.
Using this command with the type parameter displays the voice VLAN
parameters relevant to the type selected. The the local and agreed voice
VLAN settings are displayed only if this is the current voice VLAN state.
The interface-id parameter is relevant only for the OUI VLAN type.
Examples:
The following example displays the voice VLAN parameters.
switch>show voice vlan
Administrate Voice VLAN state is oui-enabled
The Operational Voice VLAN-ID is 2
Aging timeout: 1440 minutes
CoS: 6
Remark: Yes