Dell PowerEdge VRTX - Manual (Page 605)

IGMP Commands 605
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IGMP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Example
The following example configures a maximum response time of 8 seconds:
console(config)# interface vlan 100
console(config-if)# ip igmp query-max-response-time 8
console(config-if)# exit
ip igmp robustness
To configure the Internet Group Management Protocol (IGMP) robustness
variable, use the ip igmp robustness command in interface configuration
mode. To restore the default value, use the no form of this command.
Syntax
ip igmp robustness count
no ip igmp robustness
Parameters
• count —The number of expected packet loss on a link. Parameter range.
(Range: 1–7).
Default Configuration
The default value is 2.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
Use the ip igmp robustness command to change the IGMP robustness
variable.
Example
The following example changes a value of the IGMP robustness variable to 3:
console(config)# interface vlan 1