Dell PowerEdge VRTX - Manual (Page 829)

MLD Commands 829
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\MLD.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Example
The following example configures a maximum response time of 8 seconds:
console(config)# interface vlan 100
console(config-if)# ipv6 mld query-max-response-time 8
console(config-if)# exit
ipv6 mld robustness
To configure the Multicast Listener Discovery (MLD) robustness variable,
use the ipv6 mld robustness command in interface configuration mode. To
restore the default value, use the no form of this command.
Syntax
ipv6 mld robustness count
no ipv6 mld robustness
Parameters
• count —The number of expected packet loss on a link. Parameter range.
(Range: 1–7).
Default Configuration
The default value is 2.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
Use the ipv6 mld robustness command to change the MLD robustness
variable.
Example
The following example changes a value of the MLD robustness variable to 3:
console(config)# interface vlan 1