Dell PowerEdge VRTX - Manual (Page 664)

664 IP Addressing Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IP_Addressing_MeS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
• prefix-length —Specifies the number of bits that comprise the IP address
prefix. The prefix length must be preceded by a forward slash (/). (Range:
8–30)
• default-gateway ip-address —Specifies the default gateway IP address. The
route is gotten a metric of 1 for an In-Band interface and 1 for OOB.
Default Configuration
No IP address is defined for interfaces.
Command Mode
Interface Configuration mode
User Guidelines
Use the ip address command to defines a static IP address on an interface.
In-Band interfaces
Multiple IP addresses are supported. A new defined IP address is added on the
interface.
If a configured IP address overlaps another configured one a warning message
is displayed. To change an existed IP address, delete the existed one and add
the new one.
OOB port
One IP address is supported. A new IP address defined on the OOB port
overrides the previously defined IP address on the OOB port.
Defining a static IP address on the OOB port stops a DHCP client running on
the OOB port and deletes an IP address assigned by the DHCP client.
While no IP address is assigned either by DHCP client or manually the
default IP address 192.168.2.1 is assigned on the OOB port
Example
Example 1. The following example configures VLAN 1 with IP address
131.108.1.27 and subnet mask 255.255.255.0.
console(config)# interface vlan 1