Dell PowerEdge VRTX - Manual (Page 473)

LLDP Commands 473
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Syntax
clear lldp table [interface-id]
Parameters
interface-id—Specifies a port ID.
Default Configuration
If no interface is specified, the default is to clear the LLDP table for all ports.
Command Mode
Privileged EXEC mode
Example
console# clear lldp table gi0/1
lldp med location
Use the lldp med location Interface (Ethernet) Configuration mode
command to configure the location information for the LLDP Media
Endpoint Discovery (MED) for a port. Use the no form of this command to
delete location information for a port.
Syntax
lldp med location {{coordinate data} | {civic-address data} | {ecs-elin
data}}
no lldp med location {coordinate | civic-address | ecs-elin}
Parameters
• coordinate data —Specifies the location data as coordinates in
hexadecimal format.
• civic-address data —Specifies the location data as a civic address in
hexadecimal format.
• ecs-elin data —Specifies the location data as an Emergency Call Service
Emergency Location Identification Number (ECS ELIN) in hexadecimal
format.