Dell PowerEdge VRTX - Manual (Page 195)

SNMP Commands 195
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\SNMP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
snmp-server location
Use the snmp-server location Global Configuration mode command to set
the value of the system location string. Use the no form of this command to
remove the location string.
Syntax
snmp-server location text
no snmp-server location
Parameters
text—Specifies the system location information. (Length: 1–160 characters)
Default Configuration
N/A
Command Mode
Global Configuration mode
Example
The following example sets the device location to New_York.
console(config)# snmp-server location New_York
snmp-server set
Use the snmp-server set Global Configuration mode command to define
SNMP MIB commands in the configuration file if a MIB performs an action
for which there is no corresponding CLI command.
Syntax
snmp-server set variable-name name value [ name2 value2 ...]
Parameters
• variable-name—Specifies an SNMP MIB variable name, which must be a
valid string.