Dell PowerEdge VRTX - Manual (Page 344)

344 802.1X Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\802_1X.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
User Guidelines
During the quiet period, the device does not accept or initiate authentication
requests.
The default value of this command should only be changed to adjust to
unusual circumstances, such as unreliable links or specific behavioral
problems with certain clients and authentication servers.
To provide faster response time to the user, a smaller number than the default
value should be entered.
For 802.1x-based authentication, the number of failed logins is 1.
For 802.1x-based and MAC-based authentication methods, the quite period
is applied after each failed attempt.
Example
The following example sets the time interval that the device remains in the
quiet state following a failed authentication exchange to 120 seconds.
console(config)# interface gi0/1
console(config-if)# dot1x timeout quiet-period 120
dot1x timeout reauth-period
Use the dot1x timeout reauth-period Interface Configuration mode
command to set the number of seconds between re-authentication attempts.
Use the no form of this command to return to the default setting.
Syntax
dot1x timeout reauth-period seconds
no dot1x timeout reauth-period
Parameters
• reauth-period seconds —Number of seconds between re-authentication
attempts. (Range: 300-4294967295).
Default Configuration
3600