Dell PowerEdge VRTX - Manual (Page 427)

Address Table Commands 427
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
User Guidelines
Before defining forbidden ports, the Multicast group should be registered.
You can execute the command before the VLAN is created.
Example
The following example registers a source IPv6 address - Multicast IPv6
address pair to the bridge table, and forbids adding the pair to gi0/4 on VLAN
8:
console(config)# interface vlan 8
console(config-if)# bridge multicast source 2001:0:0:0:4:4:4
group FF00:0:0:0:4:4:4:1
console(config-if)# bridge multicast forbidden source
2001:0:0:0:4:4:4:1 group FF00:0:0:0:4:4:4:1 add gi0/4
bridge multicast unregistered
Use the bridge multicast unregistered Interface (Ethernet, Port Channel)
Configuration mode command to configure forwarding unregistered
Multicast addresses. Use the no form of this command to restore the default
configuration.
Syntax
bridge multicast unregistered {forwarding | filtering}
no bridge multicast unregistered
Parameters
• forwarding—Forwards unregistered Multicast packets.
•
filtering—Filters unregistered Multicast packets.
Default Configuration
Unregistered Multicast addresses are forwarded.