Dell PowerEdge VRTX - Manual (Page 372)

372 Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Ethernet.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
• detailed—Displays information for non-present ports in addition to
present ports.
Command Mode
Privileged EXEC mode
Default Configuration
Display for all interfaces. If detailed is not used, only present ports are
displayed.
Example
The following example displays the status of all configured interfaces.
console# show interfaces status
Flow Link Back Mdix
Port Type Duplex Speed Neg ctrl State Pressure Mode
------ --------- ------ ----- -------- ---- ------ -------- --
gi0/1 1G-Copper Full 1000 Disabled Off Up Disabled Off
gi0/2 1G-Copper -- -- -- -- Down -- --
Flow Link
PO Type Duplex Speed Neg control State
----- ------- ------ ----- ------- ---- ------
Po1 1G Full 10000 Disabled Off Up
show interfaces advertise
Use the show interfaces advertise Privileged EXEC mode command to
display auto-negotiation advertisement information for all configured
interfaces or for a specific interface.
Syntax
show interfaces advertise [interface-id | detailed ]