Dell PowerEdge VRTX - Manual (Page 218)

218 Web Server Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Web_Server.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Syntax
ip http port port-number
no ip http port
Parameters
port port-number —For use by the HTTP server. (Range: 1–65534)
Default Configuration
The default port number is 80.
Command Mode
Global Configuration mode
Example
The following example configures the http port number as 100.
console(config)# ip http port 100
ip http timeout-policy
Use the ip http timeout-policy Global Configuration mode command to set
the interval for the system to wait for user input in http/https sessions before
automatic logoff. Use the no form of this command to return to the default
value.
Syntax
ip http timeout-policy idle-seconds [{http-only | https-only}]
no ip http timeout-policy
Parameters
• idle-seconds—Specifies the maximum number of seconds that a
connection is kept open if no data is received or response data cannot be
sent out. (Range: 0–86400)
• http-only—The timeout is specified only for http
• https-only—The timeout is specified only for https