Dell PowerEdge VRTX - Manual (Page 555)

VLAN Commands 555
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
• ipx
Example
The following example maps the IP protocol to protocol group number 213.
console(config)# vlan database
console(config-vlan)# map protocol ip protocols-group 213
switchport general map protocols-group vlan
Use the switchport general map protocols-group vlan Interface
Configuration mode command to forward packets based on their protocol,
otherwise known as setting up a classifying rule. This command forwards
packets arriving on an interface containing a specific protocol to a specific
VLAN. Use the no form of this command to stop forwarding packets based on
their protocol.
Syntax
switchport general map protocols-group group vlan vlan-id
no switchport general map protocols-group group
Parameters
• group —Specifies the group number as defined in map protocol protocols-
group command (range: 1–65535).
• vlan-id —Defines the VLAN ID in the classifying rule.
Default Configuration
N/A
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
The VLAN classification rule priorities are:
• MAC-based VLAN (best match among the rules)