Dell PowerEdge VRTX - Manual (Page 660)

660 DHCPv6 Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\DHCPv6.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Example 2. The following is sample output from this command when the
switch’s UDID format is the vendor-based on link-layer address:
console# show ipv6 dhcp
The switch’s DHCPv6 unique identifier(DUID)is 000300010024012607AA
Format: 3
Hardware type: 1
MAC Address: 0024.0126.07AA
show ipv6 dhcp interface
Use the show ipv6 dhcp interface command in User EXEC or Privileged
EXEC mode to display DHCP for IPv6 interface information.
Syntax
show ipv6 dhcp interface [ interface-id ]
Parameters
• interface-id —Interface identifier.
Command Mode
User EXEC mode
Privileged EXEC mode
User Guidelines
If no interfaces are specified in the command, all interfaces on which DHCP
for IPv6 (client or server) is enabled are displayed. If an interface is specified
in the command, only information about the specified interface is displayed.
Example
Example 1. The following is sample output from this command when only
the Stateless service is enabled:
console# show ipv6 dhcp interface
VLAN 100 is in client mode