Dell PowerEdge VRTX - Manual (Page 568)

568 VLAN Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
A Multicast TV VLAN cannot be enabled if a guest VLAN is enabled on the
interface.
Example
The following example enables gi0/4 to receive Multicast transmissions from
VLAN 11.
console(config)# interface gi0/4
console(config-if)# switchport access multicast-tv vlan 11
switchport customer multicast-tv vlan
Use the switchport customer multicast-tv vlan Interface Configuration mode
command to enable receiving Multicast transmissions from a VLAN that is
not the customer port's VLAN, while keeping the L2 segregation with
subscribers on different customer port VLANs.
Syntax
switchport customer multicast-tv vlan {add vlan-list | remove vlan-list }
Parameters
• add vlan-list —Specifies a list of Multicast TV VLANs to add to interface.
• remove vlan-list —Specifies a list of Multicast TV VLANs to remove from
interface.
Default Configuration
The port is not a member in any Multicast TV VLAN.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
The user cannot transmit Multicast transmissions on Multicast TV VLANs.
A Multicast TV VLAN cannot be enabled if a guest VLAN is enabled on an
interface.