Dell PowerEdge VRTX - Manual (Page 534)

534 VLAN Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
vlan
Use the vlan VLAN Configuration mode or Global Configuration mode
command to create a VLAN and assign it a name (if only a single VLAN is
being created). Use the no form of this command to delete the VLAN(s).
Syntax
vlan vlan-range | { vlan-id [name vlan-name ]}
no vlan vlan-range
Parameters
• vlan-range —Specifies a list of VLAN IDs. Separate nonconsecutive VLAN
IDs with a comma and no spaces. Use a hyphen to designate a range of IDs
(range: 2-4094).
• vlan-id —Specifies a VLAN ID. (range: 2-4094).
• vlan-name —Specifies the VLAN name. (range: 1–32 characters).
Default Configuration
VLAN 1 exists by default.
Command Mode
Global Configuration mode
VLAN Database Configuration mode
User Guidelines
If the VLAN does not exist, it is created. If the VLAN cannot be created then
the command is finished with error and the current context is not changed.
Example
The following example creates a few VLANs. VLAN 1972 is assigned the
name Marketing.
console(config)# vlan database
console(config-vlan)# vlan 19-23
console(config-vlan)# vlan 100