Dell PowerEdge VRTX - Manual (Page 595)

IGMP Snooping Commands 595
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IGMP_Snooping.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
ip igmp snooping vlan immediate-leave
Use the ip igmp snooping vlan immediate-leave Global Configuration mode
command to enable the IGMP Snooping Immediate-Leave processing on a
VLAN. Use the no format of the command to disable IGMP Snooping
Immediate-Leave processing.
Syntax
ip igmp snooping vlan vlan-id immediate-leave
no ip igmp snooping vlan vlan-id immediate-leave
Parameters
• vlan-id —Specifies the VLAN ID value. (Range: 1–4094).
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
You can execute the command before the VLAN is created.
Example
The following example enables IGMP snooping immediate-leave feature on
VLAN 1.
console(config)# ip igmp snooping vlan 1 immediate-leave
show ip igmp snooping groups
The show ip igmp snooping groups EXEC mode command displays the
Multicast groups learned by the IGMP snooping.