Dell PowerEdge VRTX - Manual (Page 669)

IP Addressing Commands 669
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IP_Addressing_MeS.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
console# show ip interface
!source_precedence_is_supported &&
!broadcast_address_configuration_is_supported &&
!ip_redirects_is_supported
IP Address I/F I/F Status Type Directed Status
admin/oper Broadcast
------------- ------ ----------- ------- -------- -----
10.5.230.232/24 vlan 1 UP/UP Static disable Valid
10.5.234.202/24 vlan 4 UP/DOWN Static disable Valid
10.5.240.200/24 oob UP/UP Static Valid
Example 2 - The following example displays the IP addresses configured on
the given L2 interfaces and their types:
console# show ip interface vlan 1
!source_precedence_is_supported &&
!broadcast_address_configuration_is_supported &&
!ip_redirects_is_supported
IP Address I/F I/F Status Type Directed Status
admin/oper Broadcast
------------- ------ ----------- ------- -------- -----
10.5.230.232/24 vlan 1 UP/UP Static disable Valid
arp
Use the arp Global Configuration mode command to add a permanent entry
to the Address Resolution Protocol (ARP) cache. Use the no form of this
command to remove an entry from the ARP cache.
Syntax
arp ip-address mac-address [ interface-id ]
no arp ip-address
Parameters
• ip-address —IP address or IP alias to map to the specified MAC address.