Dell PowerEdge VRTX - Manual (Page 430)

430 Address Table Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
• port-channel port-channel-list —Specifies a list of port channels. Separate
nonconsecutive port-channels with a comma and no spaces; use a hyphen
to designate a range of port channels.
Default Configuration
Ports are not forbidden to dynamically join Multicast groups.
The default option is add.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
Use this command to forbid a port to dynamically join (by IGMP, for
example) a Multicast group.
The port can still be a Multicast router port.
Example
The following example forbids forwarding of all Multicast packets to gi0/1
within VLAN 2.
console(config)# interface vlan 2
console(config-if)# bridge multicast forbidden forward-all
add ethernet gi0/ 1
mac address-table static
Use the mac address-table static Global Configuration mode command to
add a MAC-layer station source address to the MAC address table. Use the no
form of this command to delete the MAC address.
Syntax
mac address-table static mac-address vlan vlan-id interface interface-id
[permanent | delete-on-reset | delete-on-timeout | secure]|
no mac address-table static [ mac-address] vlan vlan-id