Dell PowerEdge VRTX - Manual (Page 708)

708 IPv6 Tunnel Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Tunnel New Edition.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Syntax
tunnel isatap solicitation-interval seconds
no tunnel isatap solicitation-interval
Parameters
• seconds —Specifies the time interval in seconds between ISATAP router
solicitation messages. (Range: 10–3600).
Default Configuration
The default time interval between ISATAP router solicitation messages is 10
seconds.
Command Mode
Global Configuration mode
User Guidelines
This command determines the interval between unsolicited router
solicitation messages sent to discovery an ISATAP router.
Example
The following example sets the time interval between ISATAP router
solicitation messages to 30 seconds.
console(config)# tunnel isatap solicitation-interval 30
tunnel isatap robustness
Use the tunnel isatap robustness Global Configuration mode command to
configure the number of router solicitation refresh messages that the device
sends. Use the no form of this command to restore the default configuration.
Syntax
tunnel isatap robustness number
no tunnel isatap robustness