Dell PowerEdge VRTX - Manual (Page 179)

SNMP Commands 179
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\SNMP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
• read readview —Specifies the view name that enables viewing only.
(Length: 1–30 characters)
• write writeview —Specifies the view name that enables configuring the
agent. (Length: 1–30 characters)
Default Configuration
No group entry exists.
If
notifyview is not specified, the notify view is not defined.
If readview is not specified, all objects except for the community-table and
SNMPv3 user and access tables are available for retrieval.
If
writeview is not specified, the write view is not defined.
Command Mode
Global Configuration mode
User Guidelines
The group defined in this command is used in the snmp-server user command
to map users to the group. These users are then automatically mapped to the
views defined in this command.
The command logical key is (groupname, snmp-version, security-level). For
snmp-version v1/v2 the security-level is always noauth.
Example
The following example attaches a group called user-group to SNMPv3, assigns
the encrypted security level to the group, and limits the access rights of a view
called user-view to read-only. User tom is then assigned to user-group . So that
user tom has the rights assigned in user-view .
console(config)# snmp-server group user-group v3 priv read
user-view
console(config)# snmp-server user tom user-group v3