Dell PowerEdge VRTX - Manual (Page 406)

406 Port Channel Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Port_Channel.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Example
The following example forces port
gi0/ 1
to join port-channel 1 without an
LACP operation.
console(config)# interface gi0/1
console(config-if)# channel-group 1 mode on
port-channel load-balance
Use the port-channel load-balance Global Configuration mode command to
configure the load balancing policy of the port channeling. Use the no form of
this command to reset to default.
Syntax
port-channel load-balance {src-dst-mac
| src-dst-mac-ip
}
no port-channel load-balance
Parameters
• src-dst-mac—Port channel load balancing is based on the source and
destination MAC addresses.
• src-dst-mac-ip—Port channel load balancing is based on the source and
destination of MAC and IP addresses.
Default Configuration
src-dst-mac is the default option.
Command Mode
Global Configuration mode
Example
console(config)# port-channel load-balance src-dst-mac