Dell PowerEdge VRTX - Manual (Page 125)

Clock Commands 125
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Clock.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
sntp broadcast client enable
The sntp broadcast client enable Global Configuration mode command
enables SNTP Broadcast clients. Use the no form of this command to disable
SNTP Broadcast clients.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Parameters
N/A
Default Configuration
The SNTP Broadcast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp broadcast client enable Interface Configuration mode
command to enable the SNTP Broadcast client on a specific interface.
After entering this command, you must enter the clock source sntp
command for the command to be run. If this command is not run, the switch
will not synchronize with Broadcast servers.
Example
The following example enables SNTP Broadcast clients.
s
console(config)# sntp broadcast client enable
sntp anycast client enable
The sntp anycast client enable Global Configuration mode command
enables the SNTP Anycast client. Use the no form of this command to
disable the SNTP Anycast client.