Dell PowerEdge VRTX - Manual (Page 538)

538 VLAN Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Parameters
• vlan-range —Specifies a list of VLANs. Separate nonconsecutive VLANs
with a comma and no spaces. Use a hyphen to designate a range of VLANs.
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface VLAN range context are executed
independently on each VLAN in the range. If the command returns an error
on one of the VLANs, an error message is displayed, and the system attempts
to configure the remaining VLANs.
Example
The following example groups VLANs 221 through 228 and 889 to receive the
same command(s).
console(config)# interface range vlan 221-228, vlan 889
name
Use the name Interface Configuration (VLAN) mode command to name a
VLAN. Use the no form of this command to remove the VLAN name.
Syntax
name string
no name
Parameters
• string —Specifies a unique name associated with this VLAN. (Length:
1–32 characters).