Dell PowerEdge VRTX - Manual (Page 774)

774 Quality of Service (QoS) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\QoS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Syntax
wrr-queue cos-map queue-id cos0 ... cos7
no wrr-queue cos-map [ queue-id ]
Parameters
• queue-id—Specifies the queue number to which the CoS values are
mapped.
• cos0... cos7—Specifies up to 8 CoS values to map to the specified queue
number. (Range: 0–7)
Default Configuration
The default CoS value mapping to 8 queues is as follows:
CoS value 0 is mapped to queue 1.
CoS value 1 is mapped to queue 2.
CoS value 2 is mapped to queue 3.
CoS value 3 is mapped to queue 6.
CoS value 4 is mapped to queue 5.
CoS value 5 is mapped to queue 8.
CoS value 6 is mapped to queue 8
CoS value 7 is mapped to queue 7
Command Mode
Global Configuration mode
User Guidelines
Use this command to distribute traffic to different queues.
Example
The following example maps CoS value 4 and 6 to queue 2.
console(config)# wrr-queue cos-map 2 4 6