Dell PowerEdge VRTX - Manual (Page 822)

822 MLD Snooping Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\MLD_Snooping.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
contains the ports which have issued an explicit Exclude for that specific
source in a multicast group.
The Reporters That Are Forbidden Statically list contains the list of ports that
have asked to receive a Multicast flow but were defined as forbidden for that
multicast group in a multicast bridge.
NOTE: Under certain circumstances, the Exclude list may not contain accurate
information; for example, in the case when two Exclude reports were received on
the same port for the same group but for different sources, the port will not be in the
Exclude list but rather in the Include list.
Example
The following example shows the output for show ipv6 mld snooping groups.
show ipv6 mld snooping interface
The show ipv6 mld snooping interface EXEC mode command displays the
IPv6 MLD snooping configuration for a specific VLAN.
Syntax
show ipv6 mld snooping interface vlan-id
console# show ipv6 mld snooping groups
VLAN
----
1
1
19
19
Group Address
--------
FF12::3
FF12::3
FF12::8
FF12::8
Source Address
---------------------
FE80::201:C9FF:FE40:8001
FE80::201:C9FF:FE40:8002
FE80::201:C9FF:FE40:8003
FE80::201:C9FF:FE40:8004
Include Ports
-----------
gi0/1
gi0/2
gi0/4
gi0/1
Exclude Ports
----------
gi0/2
C
M
-
1
1
2
MLD Reporters that are forbidden statically:
VLAN
----
1
19
Group Address
-----------
FF12::3
FF12::8
Source Address
---------------------
FE80::201:C9FF:FE40:8001
FE80::201:C9FF:FE40:8001
Ports
--------
gi0/3
gi0/4