Dell PowerEdge VRTX - Manual (Page 530)

530 Spanning-Tree Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Spanning-Tree.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
show spanning-tree bpdu
Use the show spanning-tree bpdu User EXEC mode command to display the
BPDU handling when spanning-tree is disabled.
Syntax
show spanning-tree bpdu [interface-id | detailed ]
Parameters
• interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
• detailed—Displays information for non-present ports in addition to
present ports.
Default Configuration
Show information for all interfaces. If detailed is not used, only present ports
are displayed.
Command Mode
User EXEC mode
console# show spanning-tree
Spanning tree enabled mode MSTP
Default port cost method: long
###### MST 0 Vlans Mapped: 1-9
CST Root ID Priority
Address
32768
00:01:42:97:e0:00
This switch is root for CST and IST master.
Root Port gi0/1
Hello Time 2 secMax Age 20
sec
Forward Delay 15
sec
Max hops 20