Dell PowerEdge VRTX - Manual (Page 469)

LLDP Commands 469
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Command Mode
Interface (Ethernet) Configuration mode
Example
The following example enables sending LLDP MED topology change
notifications on gi0/2.
console(config)# interface gi0/2
console(config-if)# lldp med notifications topology-change
enable
lldp med fast-start repeat-count
When a port comes up, LLDP can send packets more quickly than usual
using its fast-start mechanism.
Use the lldp med fast-start repeat-count Global Configuration mode
command to configure the number of packets that is sent during the
activation of the fast start mechanism. Use the no form of this command to
return to default.
Syntax
lldp med fast-start repeat-count number
no lldp med fast-start repeat-count
Parameters
repeat-count number —Specifies the number of times the fast start LLDPDU
is being sent during the activation of the fast start mechanism. The range is 1-
10.
Default Configuration
3
Command Mode
Global Configuration mode