Dell PowerEdge VRTX - Manual (Page 403)

Green Ethernet 403
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\750_Green_Ethernet.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
• detailed—Displays information for non-present ports in addition to
present ports.
Default Configuration
Display for all ports. If detailed is not used, only present ports are displayed.
Command Mode
Privileged EXEC mode
User Guidelines
The power savings displayed is relevant to the power saved by:
• Energy detect
• Short reach
The EEE power saving is dynamic by nature since it is based on port
utilization and is therefore not taken into consideration.
The following describes the reasons for non-operation displayed by this
command.
If there are a several reasons, then only the highest priority reason is displayed.
Example
console# show green-ethernet
Energy-Detect mode: Enabled
Short-Reach mode: Disabled
Power Savings: 24% (1.08W out of maximum 4.33W)
Short-Reach Non-Operational Reasons
Priority
Reason Description
1 NP Port is not present
2 LT Link Type is not supported (fiber)
3 LS Link Speed Is not Supported (100M,10M,10G)
4 LL Link Length received from VCT test exceeds threshold
6 LD Port Link is Down – NA