Dell PowerEdge VRTX - Manual (Page 79)

Macro Commands 79
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Macro.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
macro description
Use the macro description Interface Configuration mode command to
append a description, for example, a macro name, to the macro history of an
interface. Use the no form of this command to clear the macro history of an
interface. When the macro is applied to an interface, the switch
automatically generates a macro description command with the macro name.
As a result, the name of the macro is appended to the macro history of the
interface.
Syntax
macro description text
no macro description
Parameters
• text —Description text. The text can contain up to 160 characters. The
text must be double quoted if it contains multiple words.
Default Configuration
The command has no default setting.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
When multiple macros are applied on a single interface, the description text
is a concatenation of texts from a number of previously-applied macros.
To verify the settings created by this command, run the show parser macro
command.
Example
console(config)# interface gi0/2
console(config-if)# macro apply dup
console(config-if)# exit
console(config)# interface gi0/3