Dell PowerEdge VRTX - Manual (Page 345)

802.1X Commands 345
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\802_1X.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
The command is only applied to the 802.1x authentication method.
Example
console(config)# interface gi0/1
console(config-if)# dot1x timeout reauth-period 5000
dot1x timeout server-timeout
Use the dot1x timeout server-timeout Interface Configuration mode
command to set the time interval during which the device waits for a
response from the authentication server. Use the no form of this command to
restore the default configuration.
Syntax
dot1x timeout server-timeout seconds
no dot1x timeout server-timeout
Parameters
• server-timeout seconds —Specifies the time interval in seconds during
which the device waits for a response from the authentication server.
(Range: 1–65535 seconds).
Default Configuration
The default timeout period is 30 seconds.
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
The actual timeout period can be determined by comparing the value
specified by this command to the result of multiplying the number of retries