Dell PowerEdge VRTX - Manual (Page 380)

380 Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Ethernet.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Default Configuration
8500
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
Use the storm-control broadcast enable Interface Configuration command to
enable storm control.
The calculated rate includes the 20 bytes of Ethernet framing overhead
(preamble+SFD+IPG).
Example
Example 1—Set to specific level:
console(config)# interface gi0/1
console(config-if)# storm-control broadcast level kbps 12345
storm-control include-multicast
Use the storm-control include-multicast Interface Configuration mode
command to count Multicast packets in a Broadcast storm control. Use the
no form of this command to disable counting of Multicast packets in the
Broadcast storm control.
Syntax
storm-control include-multicast
no storm-control include-multicast
Default Configuration
Disabled
Command Mode
Interface (Ethernet) Configuration mode