Dell PowerEdge VRTX - Manual (Page 579)

Voice VLAN Commands 579
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Voice_VLAN.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
voice vlan enable
Use the voice vlan enable Interface Configuration mode mode command to
enable OUI voice VLAN configuration on an interface. Use the no form of
this command to disable OUI voice VLAN configuration on an interface.
Syntax
voice vlan enable
no voice vlan enable
Default Configuration
Disabled
Command Mode
Interface Configuration mode
User Guidelines
This command is applicable only if the voice VLAN state is globally
configured as OUI voice VLAN (using voice vlan state ).
The port is added to the voice VLAN if a packet with a source MAC address
OUI address (defined by voice vlan oui-table ) is trapped on the port. Note:
The packet VLAN ID does not have to be the voice VLAN, it can be any
VLAN.
The port joins the voice VLAN as a tagged port.
If the time since the last MAC address with a source MAC address OUI
address was received on the interface exceeds the timeout limit (configured
by voice vlan aging-timeout ), the interface is removed from the voice VLAN.
Example
The following example enables OUI voice VLAN configuration on
gi0/ 2
.
console(config)# interface gi0/2
console(config-if)# voice vlan enable