Dell PowerEdge VRTX - Manual (Page 349)

802.1X Commands 349
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\802_1X.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
A rate limit is applied to the traps: not more than one trap of this type can be
sent in 10 seconds.
Example
The following example enables sending traps when a MAC address fails to be
authorized by the 802.1X mac-authentication access control.
console(config)# dot1x traps authentication failure 802.1x
dot1x traps authentication success
Use the dot1x traps authentication success Global Configuration mode
command to enable sending traps when a host is successfully authorized by an
802.1X authentication method. Use the no form of this command to disable
the traps.
Syntax
dot1x traps authentication success {[802.1x] [mac]}
no dot1x traps authentication success
Parameters
• 802.1x—Enables traps for 802.1X-based authentication.
•
mac—Enables traps for MAC-based authentication.
Default Configuration
Success traps are disabled.
Command Mode
Global Configuration mode
User Guidelines
Any combination of the keywords are allowed. At least one keyword must be
configured.
A rate limit is applied to the traps: not more than one trap of this type can be
sent in 10 seconds.