Dell PowerEdge VRTX - Manual (Page 580)

580 Voice VLAN Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Voice_VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
voice vlan secure
Use the voice vlan secure Interface Configuration mode mode command to
enable the secure mode for the OUI voice VLAN. Use the no form of this
command to disable the secure mode (see User Guidelines for an explanation
of secure mode).
Syntax
voice vlan secure
no voice vlan secure
Default Configuration
Disabled
Command Mode
Interface Configuration mode
User Guidelines
Secure mode specifies that packets that are classified to the voice VLAN with
a source MAC address that is not a OUI address (defined by voice vlan oui-
table ) are discarded.
This command is relevant only to ports that were added to the voice VLAN
automatically.
Example
The following example enables the secure mode for the OUI Voice VLAN on
gi0/ 4
.
console(config)# interface gi0/4
console(config-if)# voice vlan secure
show voice vlan
Use the show voice vlan Privileged EXEC mode command to display the
voice VLAN status for all interfaces or for a specific interface if the voice
VLAN type is OUI.