Dell PowerEdge VRTX - Manual (Page 183)

SNMP Commands 183
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\SNMP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
when computing the authentication and privacy digests from the password. If
the remote engine ID is not configured first, the configuration command
fails.
Since the same group may be defined several times, each time with different
version or different access level (noauth, auth or auth & priv), when defining
a user it is not sufficient to specify the group name, rather you must specify
group name, version and access level for complete determination of how to
handle packets from this user.
Example
This example assigns user tom to group abcd using SNMP v1 and v2c. The
default is assigned as the engineID. User tom is assigned to group abcd using
SNMP v1 and v2c
console(config)# snmp-server user tom acbd v1
console(config)# snmp-server user tom acbd v2c
console(config)# snmp-server user tom acbd v3
show snmp users
Use the show snmp users Privileged EXEC mode command to display the
configured SNMP users.
Syntax
show snmp users [ username ]
Parameters
username—Specifies the user name. (Length: 1–30 characters)
Default Configuration
Display all users.
Command Mode
Privileged EXEC mode