Dell PowerEdge VRTX - Manual (Page 33)

Template Last Updated - 2/7/2007 Preface 33
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
3
Preface
This guide describes how to use the CLI, and in addition, provides a list of
the CLI commands and their arguments.
The CLI commands described in this document are organized according to
features in separate sections.
This section describes how to use the CLI. It contains the following topics:
• User (Privilege) Levels
• CLI Command Modes
• Starting the CLI
• CLI Command Conventions
• Port Naming Convention
• Entering Commands
• IPv6 Address Conventions
• IP Address and Out-Of-Band Port
User (Privilege) Levels
Users can be created with one of the following user levels:
• Level 1 — Users with this level can only run User EXEC mode
commands. Users at this level cannot access the web GUI or commands in
the Privileged EXEC mode.
• Level 15 — Users with this level can run all commands.
A system administrator (user with level 15) can create passwords that enables
the user to go from level 1 to level 15.
The passwords for each level are set (by an administrator) using the following
command:
enable password [level privilege-
level]{password|encrypted encrypted-password}