Dell PowerEdge VRTX - Manual (Page 763)

Quality of Service (QoS) Commands 763
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\QoS.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
The match criteria is for a class map. Only one policy map per interface is
supported. The same policy map can be applied to multiple interfaces and
directions.
The
service-policy command binds a policy map to a port/port-channel.
Example
The following example creates a policy map called Policy1 and enters the
Policy-map Configuration mode.
console(config)# policy-map policy1
console(config-pmap)#
class
Use the class Policy-map Configuration mode command after the policy-map
command to attach ACLs to a policy-map.
Use the no form of this command to detach a class map from a policy map.
This command is only available when QoS is in advanced mode.
Syntax
class class-map-name [ access-group acl-name ]
no class class-map-name
Parameters
• class-map-name—Specifies the name of an existing class map. If the class
map does not exist, a new class map is created under the specified name.
• access-group acl-name —Specifies the name of an IP or MAC Access
Control List (ACL).
Default Configuration
No class map is defined for the policy map.
Command Mode
Policy-map Configuration mode.