Dell PowerEdge VRTX - Manual (Page 666)

666 IP Addressing Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IP_Addressing_MeS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Parameters
N/A
Command Mode
Interface Configuration mode
User Guidelines
Use the ip address dhcp command to enable DHCP client on the interface.
The ip address dhcp command removes all the manually configured
addresses on the interface.
The default route (Default Gateway) received in DHCP Router option
(Option 3) is assigned a metric of 1 for an In-Band interface and 253 for
OOB.
Use the no form of the command to disable DHCP client on interface.
Example
The following example acquires an IP address for VLAN 100 from DHCP.
console(config)# interface vlan100
console(config-if)# ip address dhcp
renew dhcp
Use the renew dhcp Privileged EXEC mode command to renew an IP address
that was acquired from a DHCP server for a specific interface.
Syntax
renew dhcp interface-id [force-autoconfig]
Parameters
• interface-id —Specifies an interface.
• force-autoconfig - If the DHCP server holds a DHCP option 67 record for
the assigned IP address, the record overwrites the existing device
configuration.