Dell PowerEdge VRTX - Manual (Page 227)

Telnet, Secure Shell and Secure Login Commands 227
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Telnet_SSH_and_Slogin.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
ip ssh port
The ip ssh port Global Configuration mode command specifies the TCP port
used by the SSH server. Use the no form of this command to restore the
default configuration.
Syntax
ip ssh port
port-number
no ip ssh port
Parameters
• port-number —Specifies the TCP port number to be used by the SSH
server. (Range: 1–65535).
Default Configuration
The default TCP port number is 22.
Command Mode
Global Configuration mode
Example
The following example specifies that TCP port number 8080 is used by the
SSH server.
console(config)# ip ssh port 8080
ip ssh password-auth
Use the ip ssh password-auth Global Configuration mode command to
enable password authentication of incoming SSH sessions.
Use the no form of this command to disable this function.
Syntax
ip ssh password-auth