Dell PowerEdge VRTX User Manual

Page 444

444

Address Table Commands

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC

2+3\new_system_mifs_ARC2_latest\Address_Table.fm

D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY

User Guidelines

A MAC address can be displayed in IP format only if it is within the range

0100.5e00.0000 through 0100.5e7f.ffff.
Multicast router ports (defined statically or discovered dynamically) are

members in all MAC groups.
Ports that were defined via the

command are displayed in all forbidden MAC entries.
Changing the Multicast mode can move static Multicast addresses that are

written in the device FDB to a shadow configuration because of FDB hash

collisions.

Example

The following example displays bridge Multicast address information.

console# show bridge multicast address-table

Multicast address table for VLANs in MAC-GROUP bridging mode:

Vlan MAC Address Type Ports

---- ----------------- -------------- -----

8 01:00:5e:02:02:03 Static 1-2

Forbidden ports for Multicast addresses:

Vlan MAC Address Ports

---- ----------------- -----

8 01:00:5e:02:02:03 gi0/4

Multicast address table for VLANs in IPv4-GROUP bridging mode:

Vlan MAC Address Type Ports

---- ----------------- -------------- -----

1 224.0.0.251 Dynamic gi0/2

Forbidden ports for Multicast addresses:

Vlan MAC Address Ports

---- ----------------- -----

1 232.5.6.5

1 233.22.2.6