Dell PowerEdge VRTX - Manual (Page 178)

178 SNMP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\SNMP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
snmp-server group
Use the snmp-server group Global Configuration mode command to
configure an SNMP group. Groups are used to map SNMP users to SNMP
views. Use the no form of this command to remove an SNMP group.
Syntax
snmp-server group groupname { v1 | v2 | v3 {noauth | auth | priv} [notify
notifyview]} [read readview] [write writeview]
no snmp-server group groupname {v1 | v2 | v3 [noauth | auth | priv]}
Parameters
• group groupname —Specifies the group name. (Length: 1–30 characters)
• v1—Specifies the SNMP Version 1 security model.
• v2—Specifies the SNMP Version 2 security model.
• v3—Specifies the SNMP Version 3 security model.
• noauth—Specifies that no packet authentication will be performed.
Applicable only to the SNMP version 3 security model.
• auth—Specifies that packet authentication without encryption will be
performed. Applicable only to the SNMP version 3 security model.
• priv—Specifies that packet authentication with encryption will be
performed. Applicable only to the SNMP version 3 security model. Note
that creation of SNMPv3 users with both authentication and privacy must
be done in the GUI. All other users may be created in the CLI.
• notify notifyview —Specifies the view name that enables generating
informs or a traps. An inform is a trap that requires acknowledgement.
Applicable only to the SNMP version 3 security model. (Length: 1–30
characters)
Name OID Tree Type
----------------
Default
Default
DefaultSuper
----------------------
iso
snmpNotificationMIB
iso
----------
Included
Excluded
Included