Dell PowerEdge VRTX - Manual (Page 808)

808 DNS Client Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\DNS_Client.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
ip name-server
Use the ip name-server command in Global Configuration mode to specify
the address of one or more name servers to use for name and address
resolution.
Use the no form of this command to remove the static specified addresses.
Syntax
ip name-server server1-address [ server-address2...erver-address8 ]
no ip name-server [ server-address1 ... server-address8 ]
Parameters
• server-address1 —IPv4 or IPv6 addresses of a single name server.
• server-address2 ... server-address8 —IPv4 or IPv6 addresses of additional
name servers.
Default Configuration
No name server IP addresses are defined.
Command Mode
Global Configuration mode
User Guidelines
The preference of the servers is determined by the order in which they were
entered.
Each ip name-server command replaces the configuration defined by the
previous one (if one existed).
Example
The following example shows how to specify IPv4 hosts 172.16.1.111,
172.16.1.2, and IPv6 host 2001:0DB8::3 as the name servers:
console(config)# ip name-server 172.16.1.111 172.16.1.2
2001:0DB8::3