Dell PowerEdge VRTX - Manual (Page 617)

GARP VLAN Registration Protocol Commands 617
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\GVRP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
registration on the port. Use the no form of this command to allow dynamic
registration of VLANs on a port.
Syntax
gvrp registration-forbid
no gvrp registration-forbid
Default Configuration
Dynamic registration of VLANs on the port is allowed.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example forbids dynamic registration of VLANs on gi0/2.
console(config-if)# interface gi0/2
console(config-if)# gvrp registration-forbid
clear gvrp statistics
Use the clear gvrp statistics Privileged EXEC mode command to clear GVRP
statistical information for all interfaces or for a specific interface.
Syntax
clear gvrp statistics [interface-id]
Parameters
Interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Default Configuration
All GVRP statistics are cleared.
Command Mode
Privileged EXEC mode