Dell PowerEdge VRTX - Manual (Page 225)

Template Last Updated - 2/7/2007 Telnet, Secure Shell and Secure Login Commands 225
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
14
Telnet, Secure Shell and Secure
Login Commands
ip telnet server
Use the ip telnet server Global Configuration mode command to enable the
device as a Telnet server that accepts connection requests from remote Telnet
clients. Remote Telnet clients can configure the device through the Telnet
connections.
Use the no form of this command to disable the Telnet server functionality
on the device.
Syntax
ip telnet server
no ip telnet server
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
The device can be enabled to accept connection requests from both remote
SSH and Telnet clients. It is recommended that the remote client connects to
the device using SSH (as opposed to Telnet), since SSH is a secure protocol
and Telnet is not. To enable the device to be an SSH server, use the ip ssh
server command.