beautypg.com

Show ip dhcp relay – Dell PowerEdge VRTX User Manual

Page 648

background image

648

DHCP Relay Commands

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC

2+3\new_system_mifs_ARC2_latest\DCHP_Relay.fm

D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY

no ip dhcp relay address [

ip-address

]

Parameters

ip-address

—Specifies the DHCP server IP address. Up to 8 servers can be

defined.

Default Configuration

No server is defined.

Command Mode

Interface Configuration mode

User Guidelines

Use the ip dhcp relay address command to define a DHCP Server IP address

per the interface. To define multiple DHCP Servers, use the command

multiple times.
To remove a DHCP server, use the no form of the command with the

ip-

address

argument.

The no form of the command without the

ip-address

argument deletes all

DHCP servers.

Example

The following example defines the DHCP server on the device.

console(config-if)# ip dhcp relay address 176.16.1.1

show ip dhcp relay

Use the show ip dhcp relay EXEC mode command to display the DHCP

relay information.

Syntax

show ip dhcp relay

Command Mode

User EXEC mode