Snmp-server engineid local – Dell PowerEdge VRTX User Manual
Page 189

SNMP Commands
189
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\SNMP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
User Guidelines
The logical key of the command is the list (ip-address/hostname,
traps/informs, version).
When configuring SNMP v1 or v2 notifications recipient, the software
automatically generates a notification view for that recipient for all MIBs.
For SNMPv3 the software does not automatically create a user or a notify
view.
Use the commands snmp-server user (ISCLI) and snmp-server group to
create a user or a group.
Example
The following defines a host at the IP address displayed.
console(config)# snmp-server host 1.1.1.121 abc
snmp-server engineID local
The snmp-server engineID local Global Configuration mode command
specifies the SNMP engineID on the local device for SNMP v3. Use the no
form of this command to remove this engine ID.
Syntax
snmp-server engineID local {
engineid-string
|
default
}
no snmp-server engineID local
Parameters
• engineid-string—Specifies a concatenated hexadecimal character string
identifying the engine ID. Each byte in a hexadecimal character string is
two hexadecimal digits. Bytes are separated by a period or colon. If an odd
number of hexadecimal digits are entered, the system automatically
prefixes the digit 0 to the string. (Length: 5–32 characters, 9–64
hexadecimal digits)
• default—Specifies that the engine ID is created automatically based on
the device MAC address.