Dell PowerEdge VRTX - Manual (Page 537)

VLAN Commands 537
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
interface vlan
Use the interface vlan Global Configuration mode command to enter the
Interface Configuration (VLAN) mode for a specific VLAN. After this
command is entered, all commands configure this VLAN.
Syntax
interface vlan vlan-id
Parameters
• vlan-id —Specifies the VLAN to be configured.
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
If the VLAN does not exist, this command is finished with an error and the
current context is not changed.
Example
The following example configures VLAN 1 with IP address 131.108.1.27 and
subnet mask 255.255.255.0.
console(config)# interface vlan 1
console(config-if)# ip address 131.108.1.27 255.255.255.0
interface range vlan
Use the interface range vlan Global Configuration mode command to
configure multiple VLANs simultaneously.
Syntax
interface range vlan vlan-range