Dell PowerEdge VRTX - Manual (Page 112)

112 System Management Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\System_Management.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Parameters
session—Show information for specific session only. Available values are:
management, 802.1x, port, fdb, port-mirroring, spanning-tree, vlan, voice-
vlan, ip-addressing, network-security and qos-acl.
Command Mode
User EXEC mode
Examples
console# show system defaults
show tech-support
Use the show tech-support EXEC mode command to display system and
configuration information that can be provided to the Technical Assistance
Center when reporting a problem.
Syntax
show tech-support [ config | memory ]
Parameters
• memory—Displays memory and processor state data.
•
config—Displays switch configuration within the CLI commands
supported on the device.
Default Configuration
By default, this command displays the output of technical-support-related
show commands. Use keywords to specify the type of information to be
displayed. If you do not specify any parameters, the system displays all
configuration and memory data.
Command Types
Switch command.
Command Mode
User EXEC mode