Dell PowerEdge VRTX - Manual (Page 379)

Ethernet Configuration Commands 379
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Ethernet.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Syntax
storm-control broadcast enable
no storm-control broadcast enable
Parameters
N/A
Default Configuration
Disabled
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
Use the storm-control include-multicast Interface Configuration command to
count Multicast packets and optionally unknown Unicast packets in the
storm control calculation.
Example
console(config)# interface gi0/1
console(config-if)# storm-control broadcast enable
storm-control broadcast level kbps
Use the storm-control broadcast level Interface Configuration mode
command to configure the maximum rate of broadcast on a port. Use the no
form of this command to return to default.
Syntax
storm-control broadcast level kbps kbps
no storm-control broadcast level
Parameters
kbps—Maximum of kilobits per second of Broadcast traffic on a port. (Range
3500 – max port speed)