Dell PowerEdge VRTX - Manual (Page 286)

286 TACACS+ Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\TACACS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
• priority priority —Specifies the order in which the TACACS+ servers are
used, where 0 is the highest priority. (Range: 0-65535)
Default Configuration
No TACACS+ host is specified.
The default port-number is 1812.
If timeout is not specified, the global value (set in the tacacs-server timeout
command) is used.
If key-string is not specified, the global value (set in the tacacs-server key
command) is used.
If the source value is not specified, the global value is set in: tacacs-server host
source-interface or: tacacs-server host source-interface-ipv6.
Command Mode
Global Configuration mode
User Guidelines
Multiple tacacs-server host commands can be used to specify multiple hosts.
Example
The following example specifies a TACACS+ host.
console(config)# tacacs-server host 172.16.1.1
tacacs-server key
Use the tacacs-server key Global Configuration mode command to set the
authentication encryption key used for all TACACS+ communications
between the device and the TACACS+ daemon. Use the no form of this
command to disable the key.
Syntax
tacacs-server key key-string
no tacacs-server key